Special version
★Mr. Keshe showed how to de-contaminate the nuclear waste in Fukushima (4)~3
★formally introduce the gans
★formally enter the subject of how to clear fukushima nuclear waste and pollution
★if you pinch yourself, you are pinching the gas in solid state
⋯⋯
===
Tepco cannot literally use these kinds of things so freely. But they have to do a different composition and proposition.
So we show you the next step. How it can be done. This process is unknown. Literally, new technology. These materials are what we've been told can not exist. This is CO2 gas in a solid state, as a powder. The same CO2...liquid at room temperature and pressure. We've shown these materials before.
Literally, as you can see, the CO2 is in a powdered state at room temperature. What has happened, in this process, we have managed not to change the environmental condition to have reached the new material but we have managed to change the characteristics and gravitational-magnetic field of the matter.25:00
How it's done...it's very simple. This process is, literally can be carried out and produced in simple units like this. These are as you see is a working unit, is not the theoretical.
What happen? What you see, you see the same mesh again. as before. And what you see, literally, you can see the same wires, as before, which has been used for that process.
So, in a very simple creating condition in the environment, and through some 7 - 10 years of research, we have changed the taboo that gases can be in a solid state at minus, so many hundreds of degrees, or high pressures.
In fact, when you use these materials, and you produce them, this is nano copper oxide in the same form and this is another new material.
These materials do not burn do not get destroyed, no acid can affect them. We have tried every means to destroy these materials, and it has not worked. You can see the residue of it here. This is over 200 degrees temperature. It comes back and it solidifies. 26:29
What we offer to Tepco is very simple. You mix this material into the water. Into the liquid in your containment. And you allow it to settle. In this process all the nuclear materials within the water, doesn't matter cesium, tritium, both extremes, to Cesium 137 and plus, will get attached to the structure of this material, and it literally settles to the bottom. The water you get on the top is totally pure. Water, no contamination.
So we get rid of the contamination problem, which is sitting at the moment, in these tanks. What you can do, at the same time as you were creating the oxide, nano-oxides, we showed before, literally you can place a magnet and you can see how the magnet brings the material to one position. 27:49
So, the rest of the water stays clear. This is a different process, the same. All material has come to the point where the magnet sits. So, you extract it as a solid. the same with this material.. again, you can see the shape of even the hole. you can see how the material gets attracted and sits on the bottom.
So, what you do, you have literally totally clean water on the top, you get rid of. and all the contamination is settled to the bottom.
You can carry the same process in either way. all you do, you take the top layer off...no contamination. and that's how you clean up millions of gallons of water which is sitting in tanks at Tepco. The process costs in mass production, maybe half a million, but, the situation can be solved, and can be used for future accidents once we learn more.
This technology is very much, very similar t the technology we saw in the Iraq-Kuwaiti war
In the Iraq-Kuwaiti war, if those are ones who remember, prior to this war there was a method, only one method known that if you had an explosion in the oil well, you had to do a hole on the side, that costs a few million dollars, to cap the fire of the oil well. when Saddam left Kuwait, he blew a lot of oil wells up. He set them on fire, to make sure the enemy never benefited by it. And to close these oil wells without literally taking years, the Americans and the British asked for international organizations to help, that it can be brought down much faster.
Romanians arrived with a jet on the back of a truck, reversed jet, and all they did they literally turned on their engines, and they blew out the fire with the jet engines, backwards. And so rapidly in a matter of weeks what was assumed to last for years to decontaminate and clean up and switch off, was solved. 30:14
This is the same technology, but very advanced, but this is part of the structure of our own body. We live through this process. we've been told the gases do not and can not be in a solid state, at room pressure and room temperature. 30:30
But in fact, if you just think for one second, you realize how this hypocrisy has become to be accepted.
Look at the structure of your own body...
We are made of amino acids...Carbon, Hydrogen, Nitrogen, Oxygen. Gases in the environment. And we say these gases can not become solid matter. But the truth is, if you pinch your own, and squeeze your own flesh, you are pinching solid gases.
so, in reality, we never understood how this process is done, but now we can see it.
The interesting thing is, that these materials behave as superconductors The best superconductors we ever knew at room temperature and pressure. We published this three years ago, in a book called, "The Structure of the Light"
You can see the material. You can see how it is made to solid. And the material has been tested by the Universities, confirming the technology. It's been kept silenced, and one of the biggest pressures on the Keshe Foundation has been to keep theses kind of technologies silenced, that the old technologies carry on.. This is the Raman Spectroscopy and Infra-red Spectroscopy, done by the University of Ghent in Belgium...not by us. And it confirms the fingerprint of CO2 characteristics
so, what we show you as CO2 has been tested by independent, by scientists, but it has been classified, because of the reasons known to the governments. So, now you have seen how simply as you can see, this material is settling, very very slowly.
By the time in 24 hours, it will be totally exactly like these materials here. Clean water, you can literally drink this, you can use it. The same material, the same things, can be used for decontamination of the radioactive material in the air. 32:55
With this package, we extract CO2. CO2 is extracted from the air. This is one of the contamination problems which we have, they say too much CO2. In air now, we have too much radioactive materials. The same process can be developed for extracting it. We have done it. 33:15
These simple systems have created, converted CO2 gas into a solid state. We can absorb the same radioactive materials from the environment, in a larger scale.
The whole thing comes down to one thing...How we have managed to extract what has been released by Tepco, using what material is available in the farmlands, and in the country. This material can later on, be separated in a very simple way. The technology exists in South Korea, and in Belgium. We know the company which can do it, if the need be.
Now, we come to a totally radical technology which we have never disclosed, but for the first time we are going to show and explain the process of technology, which can help with the decontamination in a totally different way.
(To be continued)
留言列表
知識尋求 主題摘錄 (13)
