Keshe台灣凱史知識尋求資料館 - 繁體中文 (非官方組織 /官方資料)

原貼文作者Bono Tsai

Magrav等離子體生產（奈米銅火烤法）

1.製作奈米塗層銅板：

通過火力生產成功的奈米塗層銅板的關鍵是---清潔，清潔銅板表面的最佳工具是『火』。使用火(烤)法代替鹼液在板上製造奈米材料的目的是速度。一旦掌握了以下技術，您就可以在幾小時內製作出所需的所有奈米銅🙏👈🤟

請按照一步一步的圖片及其（內部）描述 –

Magrav Plasma production (Nano coating Copper Using Fire Method)

1. Creating nano coated copper plate:

 The key to produce a successful nano coated copper plate through fire is--- cleanness, and the best tool to clean surface of copper plate is ---fire. The purpose of using fire method instead of alkali liquor to create nano materials on plates is speed. Once you can master the following techniques, you can make all nano coated copper that you need within hours.👈👈😜

Please follow the step by step pictures and its (inside) descriptions---

步驟一、每次Magrav工藝後，銅板需要保持在清水下以防止氧化

(1)    After every Magrav process, copper plates need to be kept under clean water to

prevent oxidization.

步驟二、在加熱板之前，需要用乾淨的自來水手洗銅表面以去除任何有機化合物。用左手和右手，分別清洗盤子的兩側。這是用雙手自己的生物電，在單板內產生靜電場; 類似於使用Ω儀表來優化奈米材料。

(2) Before heating up the plate, the copper surface need to be hand washed with clean tap water to remove any organic compound. by using your left /and right hand, wash the two sides of the plate respectfully. This is to use your own bio electricity from both hands, to create electrostatic fields within single plate; similar of using Ω meter to optimize nano materials.

步驟三、洗滌的感覺是從滑到澀

The sensation of washing is from slippery to astringent sense

步驟四、最好的佈局 - 家用燃氣灶每次加熱3個最適宜。

the best layout of plates -- 3 pcs on every heating is just right for domestic size gas stove.
 

步驟五、使用一些鐵絲形成托盤（或網）用於支撐。(5) Using some iron wires to form a tray (or net) for supporting.

步驟六、蓋住銅板，使熱量均勻分佈到每個板上。Cover the copper plates for even distributing the heat to every plate.

步驟七、加熱至少3次，第1次用於清潔表面，火力可以更大。 第二次和第三次用於構建NANO材料，火力更小。每次約1分鐘， 每次加熱之間，手洗。There are at least 3 times of heating, 1st time is for cleaning the surfaces, fire can be bigger. 2nd an 3rd times are for building up the NANO materials, fire smaller. Timing approxi. 1 minute. Between every heating, hand wash.

我發現9×10cm是快速加熱和其他控制的最佳尺寸 I found out that 9 by 10cm is the best size for fast heating and other controls